2018-24 Toyota Camry Lower Trims Push To Start

Headlight Delay Module

Box Content:

Headlight delay module
OBD Connector

Unlock Button Activation:

1. Press The Unlock Button Once: Pressing the unlock button for the first time will activate the daytime running lights, and front, and rear fog lights. Press the car lock button within 10 seconds to turn them off after 5 seconds. If the lock button is not pressed, it will automatically turn off after 15 seconds.

2. Press The Unlock Button Twice Within 10 Seconds: Pressing the unlock button a second time within 10 seconds will turn on the headlights. If the second unlock button press occurs after 10 seconds, only the daytime running lights, front, and rear fog lights will remain on.

Headlight Delay at Night:

1. Flame Out Headlight Delay: When the car is turned off at night, the headlights will remain on for one minute. Within this one minute, press the lock car button to turn off the headlights after 5 seconds. If the lock button is not pressed, the headlights will automatically turn off after one minute.

Installation Instructions:

1. Using a Phillips screwdriver, unscrew the three screws located at the left, right, and below the steering wheel to remove the steering wheel cover.

2. Unplug the original car’s plug located under the steering wheel.

3. Connect the headlight delay module to the corresponding socket.

4. Connect the adapter plug to the original car’s socket.

5. Conceal the wiring harness, restore the cover plate of the original car’s steering wheel, and the installation is now complete.

The processing time for orders is approximately 3-5 days.

Shipping time may take around 7-10 days.

For a step-by-step installation guide, please refer to the following video: https://www.youtube.com/watch?v=Vp7SenHtrVI&t=1s

Please read our Terms and Conditions